Home / All / Welding Equipment / All products /

CHINA double pulse mig TIG welding machine PROMIG 360SYN DPulse SWF 380V

CHINA double pulse mig TIG welding machine PROMIG 360SYN DPulse SWF 380V
CHINA double pulse mig TIG welding machine PROMIG 360SYN DPulse SWF 380VCHINA double pulse mig TIG welding machine PROMIG 360SYN DPulse SWF 380VCHINA double pulse mig TIG welding machine PROMIG 360SYN DPulse SWF 380VCHINA double pulse mig TIG welding machine PROMIG 360SYN DPulse SWF 380VCHINA double pulse mig TIG welding machine PROMIG 360SYN DPulse SWF 380V

CHINA double pulse mig TIG welding machine PROMIG 360SYN DPulse SWF 380V

Advanced MIG Solutions For Mobile Welding Jobs
Detail Information
DETAILS
Advanced MIG Solutions For Mobile Welding Jobs
PROMIG 360SYN DPulse SWF  
Synergy Control - Set weld procedures with one control. Just easily takes 3 Steps to achieve weld perfection.
Improved Operation Process & Controls - Initial Arc control, Burn Back control, Arc Length control, Dynamic control, these make an easier operation and handling for welding.
High Speed Pulse MIG (HSP) - The deposition rate can increase 25~48% for M.S. by comparing with MAG process.
Separated Wire Feeder & Remote Control - Portable & Convinient for long distance work.
Advanced MIG Processes Optional - Advanced ULS, HSA, HPC, HSS package for Robotic welding available.
Robot Ready - Optional package for robot interface by Analog connectors or Digital ports including EtherNetlP, DeviceNet, CAN, CANOPEN, RJ485 etc.

symbol description

HSP - High Speed Pulse Technology
-Specifically designed for demanding workshop use, the deposition rate can increase 25~48 % for various materials, whether used in manufacturing thick materials or sheet metal.
-The High-Speed Pulse(HSP) process enables you to save time, money, and energy compared to traditional pulse welding. This process is ready to raise pulse welding to a whole new level!
-In general, One pulse melt one droplet, but we increase the submission of these droplets by TOPWELL’s New High-Speed pulse process.The transition will be faster, narrower HAZ zone and deeper penetration!
HSP
HSP
Get better welding seam
Less heat input, less spatters, less rework.

welding seam
Get higher welding strength
Deeper penetration, no undercut defects, higher strength.

welding strength

HPC - Hybrid Pulse Control
HPC




The key is synergetic waveform controlled welding process control variants applied in MIG welding which are  Pulse(spray arc) and short-circuit transfer types in one duty cycle. It delivers exceptional directional stability, deep penetration and free-spatters.
HPC Vertical-up Welding Process



The secret is the combination of two processes: one is the high energy phase to heat up the material quickly. Topwell's control technology ensures a perfect transition to the rapidly reduced energy phase. It ensures reliable penetration, precisely sized weld filling and a near- optimal throat thickness.Vertical-up welding with Topwell's HPC process is significantly much faster and simpler than classical "X-Mas tree".
HPC Vertical-up Welding Process
HDP - High-speed Double Pulse
HDP is the High-Speed Double Pulse. The high and low pulse phases of the double pulse work with the High Speed Pulse process, the deposition rate is increased by up to 30%, the welding productivity is significantly improved than a standard double pulse. The professional welding curve for excellent control of heating and cooling phases, ensures precise energy input, low spatter, low distortion and a beautiful TIG-like welding appearance. HDP is particularly suitable for medium to thick-walled welding, especially for Aluminum and Steel applications. 
HDP
HDP

HSA - High Speed Spray Arc
The perfect combination of a highly concentrated and extremely stable arc with high density. HSA delivers deeper penetration, narrower heating zone, allows smaller opening angles for multi-layer welding, significantly improves the welding speed up to 30% faster than conventional MIG-MAG welding. It makes welding more efficient and more economical.
HSA
HSA

MDP - Micro Double Process
MDP is Micro Double Process, ultra-precise on the synergy Pulse wave-form controlled process-control, freely adjust the weld seam chevrons from coarse to fine. The key is that when the high and low pulses alternate, there is no droplet formation in the low pulse phase. The advantage of MDP are precise energy input, low distortion, perfect TIG-like welding appearance easily produced by anyone, and the welding productivity can up to twice as quick as the conventional TIG. MDP is particularly suitable for thin to medium-walled (1-8mm) Aluminum, Steel, and CrNi applications, like frames, tables, beds, and furniture structures.
MDP
MDP
Standard            Optional

Simple Operation
3 Steps to achieve weld perfection
1. Select operation mode
2. Select Job-list No.
3. Adjust welding current
(always the perfect setting by the synergic function using the material thickness)

Simple Operation
Synergy Control With Job-list
The Job-lists display is easily and intuitively controlled through its graphical user interface.We assembled the perfect welding curve in every Job-No. for highly efficient multi-process welding of carbon steels and stainless steel and aluminum alloys. Operation is easier than ever before.

Job-list

Improved Operation Process & Controls
Arc Length control
With the arc length control, no matter the changing distance between the torch and the workpiece, or the welding voltage, the arc length is kept constant, and the seam quality and appearance remain unchanged.

Arc Length control
Dynamic control
The arc can easily be adjusted depending on the workpiece and positions as well as to the individual preferences of the welder through Dynamic Control. Changing the arc to soft or hard or anywhere in between, increases the reliability for a good root formation and side fusion even with a non-ideal position of the torch.

Dynamic control
Improved Operation Process & Controls
HSS is the high speed spot welding, which is perfectly combining the welding process, arc physics, high dynamic power response and powerful motor control technology, short in arc ignition time and arc ending time, a welding spool can be formed swiftly. A spot welding cycle is quickly completed, cycle over and over, by adjusting the time gap with the robot to get the fish scale you wish, weld seam is clear and beautiful.
HSS
HSS

VIDEO

SPECIFICATIONS
Machines
Product Name
PROMIG 360SYN DPulse SWF 
Machines Processes
SMAW
FCAW
GMAW
GMAW-P
GMAW-HDP
GMAW-HSP
Wire Feeder
4-Rollers
Product Weights & Dimensions
Dimensions(L*W*H):Machine
685*305*620mm
Net Weight : Machine
47KG
Basic Specification
Mains voltage(V)
3PH~400V±15%(50/60Hz)
Max.Load Power Capacity
14.88KVA
Rated Duty cycle at 40℃(105℉): 60%
360A/32V
Rated Duty cycle at 40℃(105℉): 100%
250A/26.5V
Open Circuit Voltage
70V~80V
Power Factor
0.87
Efficiency
89%
Wire feed unit
4 rollers
Wire feed speed rang
0~25m/min
Wire Spool Capacity
300mm(15kg)
Wires φ (mm): Fe 
0.8~1.2mm
   Wires φ (mm): Alu
0.8~1.2mm
Wires φ (mm): Flux-cored
0.8~1.2mm
SPECIFICATION

YOU MAY ALSO NEED
Push-Pull Gun
Push-Pull Gun
 Remote Control
 Remote Control
Welding Jacket
Welding Jacket
Preminum welding helmet
Preminum welding helmet

ANY COMMENTS? YOU ARE WELCOME TO LEAVE MESSAGE TO US!
*Email
Tel
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
Review
  • Loading...