- Ability to preset the current;

- 100% duty cycle with a maximum output capacity;

- Reduced heat affected zone, minimized distortion and increased mechanical properties;

- Overloading, over current, loss of phase and short circuit protection ensure long-lasting performance;

- Use the mode switch to select the desired output characteristics for the process being used–CC and CV;

- Versatile power source is capable to MMA, MIG/MAG and Carbon Arc Gouging;

- Precise output control results in a stable arc;

- Modular parallel to enhance reliability;

- User-friendly operation panel.

- Compact and efficient design allows for easy movement between work pieces;

- Self-propelled, 3-wheeled drive provides stable, accurate and constant operation;

- Arc Tractor Process Control with digital display, allows presetting and control of welding parameters;

- X-axis is the travel direction, 0.1-1.3mpm(3.9-51 IPM);

- +Y-axis (vertical) 0-70mm +± 100mm(Vertical head lift and slide);

- R y ±90°. Weld angle is up to 90°from vertical to either side;

- R z 45°. Angle forward or backwards by up to 45 degrees;

- R x 45°. Drag angle is up to 45°from vertical;

- Easily accommodates a 55-pound (25kg) wire reel for fewer wire changeovers.;

- Horizontal, vertical and rotary slides allow for quick adjustment of weld nozzle into various ;

- The rugged design ensures a long life span in harsh conditions;

- Manual clutch enables freewheeling movement of the tractor;

- Can upgrade to 4-wheel tractor.

For flat or fillet welding medium and thin plates

For various positions welding

For flat or fillet welding medium and thin plate, inside and outside circular

For Twin Wires Welding

For Twin Wires Welding

- The pre-selection of nominal values for welding current, arc voltage and speed in coordination with the SubArc-1000XD/1250XD power source ensures a high degree of automation;

- The AH-1 welding head has an automatic ignition and automatic burn-back with withdraw for an optimized welding process;

- The welding head also has adjustment to angle forward or backwards by up to 45 degrees & side to side by up to 45 degrees;

- All welding heads are equipped with a laser pointer and a mechanical pointer for visual seam tracking. Via a cross support, the AH-1 can be manually positioned with an effective adjusting range of 100mm each;