Home / All / Plasma Cutting / All Product /

MAX200 High-Definition Plasma Cutting System with Extra Productivity

MAX200 High-Definition Plasma Cutting System with Extra Productivity
MAX200 High-Definition Plasma Cutting System with Extra ProductivityMAX200 High-Definition Plasma Cutting System with Extra ProductivityMAX200 High-Definition Plasma Cutting System with Extra ProductivityMAX200 High-Definition Plasma Cutting System with Extra ProductivityMAX200 High-Definition Plasma Cutting System with Extra ProductivityMAX200 High-Definition Plasma Cutting System with Extra Productivity

MAX200 High-Definition Plasma Cutting System with Extra Productivity

The HD-MAX plasma systems deliver high performance cut quality with Maximized cutting speed.
CategoriesAll Product
BrandTOPWELL
ModelMAX200
Input Voltage3PH ~ 400V ±15%
Duty Cycle Rating 40℃(105℉)200A@100%
Plasma GasO2; Air; N2; H35
Shield GasO2; Air; N2
Download
Update TimeDec 25,2024
Detail Information
DETAILS
MAX200
Extra-Definition, Maximized productivity across a broad range of application needs, from very thin to heavier thicknesses.

Cutting Capacity
Mild Steel Cut Capacity
Thickness
Dross free*
25mm
Production pierce
32mm
Maximum cutting capacity
50mm
Superior Cutting Performance
Superior Cutting Performance
Optimized gas parameters are set and controlled by the software. With Oxygen/Air/N2/H35 plamsa gas, the MAX series plasma cutting system achieves impressive cut speeds, consistent cut quality and exceptional consumable life.
Maximized Productivity


· MAX Series provides faster cutting speed to maximize productivity.
· Engineered with 100% duty cycle for the most demanding production environments.
Maximized Productivity
Long-life Consumables
Long-life Consumables


The MAX200 system ramps current and gas flow up and down in a tightly controlled manner to reduce electrode and nozzle erosion.

Reducing electrode and nozzle erosion enables more consistent cut quality over a longer period of time, while providing a significant reduction in operating cost.

· Ignitions per cutting time in seconds
· 20 second duration
· MAX200: 810 times
Efficient Gas Supply



The MAX200 plasma systems significantly increase the efficiency of gas and reduce the gas consumption.

· Cutting Current: 200A
· Gas consumption: 
  Plasma Gas: 60 l/min
  Shielding Gas: 75 l/min
Efficient Gas Supply
Bevel Cutting Technology
Bevel Cutting Technology





Bevel Cutting Technology is a performance application for mild steel. Factory tested and easily implemented, it takes the guesswork out of the plasma bevel-cutting process. With Bevel Cutting Technology, setups for new jobs are quick and results are accurate and consistent.

· 1 iteration
· Using True Bevel
· Acceptable part and ready to start production
Refined Torch System






· Vented nozzle technology aligns and focuses the plasma arc.
· High Definition Cutting enables powerful precision cutting for superior quality and consistency on mild steel.
· High Definition delivers superior quality to thin stainless steel cutting.
Refined Torch System
TP300MAX Plasma Torch

VIDEO

SPECIFICATIONS
Machines
Product Name
MAX200
Cut angle(ISO 9013 range*)
2
Weldability
Ready to weld
Plasma Gas
O2; Air; N2; H35
Shield Gas
O2; Air; N2;
Product Weights & Dimensions
Dimensions(L*W*H)
960*420*1100mm
Net Weight
165KG
Basic Specification
Input Voltage
380V/400V, 3PH, 50/60Hz
Input Power
50KVA
Rated Output Voltage
50~200VDC
Rated Output(40℃) 100%
200A
Open Circuit Voltage (OCV)
430VDC
* ISO 9013 is a standard that defines cut quality of thermally cut parts. The lower the range (range 1 is the lowest), the smaller the angle on the cut face. Cut angle in range 4 is better than in range 5.
SPECIFICATION

YOU MAY ALSO NEED
TP300MAX consumable Kit
TP300MAX consumable Kit
TP260XD
TP260XD
TP260XD Consumable Kit
TP260XD Consumable Kit
Gas Console
Gas Console (H35/N2)
Gas Console
Gas Console (Air/Air)

ANY COMMENTS? YOU ARE WELCOME TO LEAVE MESSAGE TO US!
*Email
Tel
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
Review
  • Loading...