MT-250i/300i
/FEATURES
Quick Specs
- Application:
- Metal Fabrication
- Maintenance and Repair
- Auto Body
- Light Industrial
- Processes:
- MIG,
- Flux-Cored,
- MMA(Stick),
- TIG
- Input Power:250i: 230V, 1-Phase
- 300i: 400V, 3-Phase
- Amperage Range:250i: 30-250A
- 300i: 30-300A
- Rated Output at 40℃ (104℉):
- 250i: 250A at 26.5V @60% Duty Cycle
- 300i: 300A at 29V @60% Duty Cycle
- Weight:32kg
General View of Control Panel
1.Spot/Stick welding TIME 1:
on welding time adjustment knob.
2.Spot/Stick welding TIME 2:
off welding time adjustment knob.
3.Spot/stick welding mode selection knob.
4.Welding Voltage regulator.
5.Welding Current regulator.
6.Arc Force regulator.
7.Power/working pilot lamp.
8.Arc Force regulator.
9.Over-load/Over-heat Protection
or Damage pilot lamp.
10.Volmeter.
11.MMA/MIG welding mode selection.
12.2T/4T selection.
The short-circuiting metal transfer
The short-circuiting metal transfer mode is the low heat input
mode of metal transfer for GMAW and has higher electrode
efficiencies, 93% or more. The low heat input reduces
weldment distortion and makes it ideal for sheet metal
thickness materials.
Lift TIG Mode
Lift TIG Modeprovides TIG arc initiation without the
use of high frequency. Touch, bump or scratch the
work surface with the electrode to start the arc.
It also has a good result in tig welding.Spot/Stitch mode
Use the spot and cycle arc timer you can easily
control the welding time and the stitch length during
the continue spot welding jobs.
Spot/Stitch mode provides a quick and effective
means for spot welding mild,galvanized or stainless
materials. Very useful for the car body repairs.Multipurpose AMP connectors
The 10 Pins multipurpose AMP connectors extend the usage
range and it's easy to work with a push-pull torch or spool
gun and suitable a variety of filler wires.Four-Roll Drive System
4-Rolls wire-feeder with strong feeding motor.
Four-roll drive systems deliver the electrode to the welding
torch.It provides a stable wire speed and is popular for industrial applications./SPECIFICATIONS
Technical specifications
Item No MT-250i MT-300i Rated Input Voltage 1PH ~ 230V ±15% 3PH ~ 400V ±15% Max. Load Power Capacity 10.35KVA 12.04KVA Rated Duty Cycle(40℃) 60% TIG: 250A/20V TIG: 300A/22V MIG: 250A/26.5V MIG: Separated Wire-feeder: 300A/29V Internal Wire-feeder: 250A/26.5V MMA: 250A/28V MMA: 250A/28V 100% TIG:200A/18V TIG:250A/20V MIG: 200A/24V MIG: 200A/24V MMA: 200A/28V MMA:200A/28V Welding Current/Voltage Range TIG:30A/11.2V~250A/20V TIG:30A/11.2V~300A/22V MIG: 30A/15.5V~250A/26.5V MIG: 30A/15.5V~300A/29V MMA:30A/21.2V~250A/28V MMA:30A/21.2V~250A/28V Open Circuit Voltage 55V 55V Power Factor 0.8 0.85 Efficiency 80% 85% Pre-Gas Time Preset Preset Flow-Gas Time Preset Preset Wire-feed Mechanism 4 Rollers 4 Rollers Wire-feed Speed Range 0~25m/min 0~25m/min Wire Spool Capacity 300mm (15kg) 300mm (15kg) Filler Wires Ø (mm) Fe, Ss: 0.6~1.0 mm 0.6~1.6 mm Flux Cored: 0.9~1.2 mm 0.8~1.6 mm Al: 0.9~1.2 mm 1.0~1.6 mm Dimension (LxWxH) 770X250X650mm 770X250X650mm Weight (KG) 32 KG 32 KG
/ACCESSORIES
For Standard accessoriesFor Optional accessories/RESOURCES
/DOCUMENTS
- Tel
- *Title
- *Content
- Loading...