TIG 200amp AC DC Pulse TIG Welder ALUTIG-200PAC/DC
/FEATURES
Quick Specs- Application:
- Metal Fabrication
- Maintenance and Repair
- Auto Body
- Light Industrial
- Processes:
- DC TIG (GTAW)
- AC TIG (GTAW)
- MIX TIG (GTAW)
- Stick (SMAW)
- Input Power:200P:230V,1-Phase
- 200MV:110-220V,1-Phase
- Amperage Range: 5-200A
- Rated Output at 40℃ (104℉):
- 200A at 18V @60% Duty Cycle
- Weight:23kg
General View of Control Panel
1.Welding Process
DC TIG
AC TIG
MIX TIG
DC MMA
2.Memory Display
3.Memory
4.Ammeter/Voltmeter Display
5.Encoder Control
6.Arc Ignition type
HF Impulse
LIFT Arc
7.Pulser Control
Peak Current : 5A~200A
Base Current :5A~200A
Pulse Frequency : 0.2Hz~200Hz
Pulse Width (Ratio) : 1~100%
8.Mode
2T(STD)
4T(HOLD)
Spot Arc9.Sequencer Control
Arc-starting Current: 10A~160A
Crater-filling Current: 5A~200A
Current Up-slope Time: 0.1S~10S
Current Down-slop Time:0.1S~15S
10.Pre-Gas Time: 0.1S~10S
Flow-Gas Time: 0.1S~15S
11.AC Waveshape types
Advanced Squarewave
Soft Squarewave
Sine Wave
Triangular Wave
12.Arc Ignition Polarity DC+/DC-
13.MIX TIG
MIX Frequency: 0.1Hz~5Hz
DC Balance: (%) 10~90
14.AC Waveshape
AC Frequency Range : 20Hz~200Hz
AC Clean Width (AC Balance) : +40~-40
AC Clean Ratio (AC Bias) % : +30~-50
MIX TIG Control
Features of MIX TIG:
The AC current can get a very good clearance, and
DC current can get a deeper penetration. Use the
MIX TIG we can get an excellent Arc Concentration,
can be carried out the excellent welding performance
from thin to thick plate.
1) Nice weld appearance, deep penetration.
2) Excellet Arc Concentration..
3) Substantially reduce the electrode consumption.MIX TIG Frequency (Hz):
the cycle time of MIX
TIG in 1 second. Adjustable range: 0.1-10Hz.MIX TIG Balance (DC) %:
DC Balance (%) = (tad/Tmix) x 100
MIX TIG Frequency (Hz):
AC Frequency control Controls the
width of theControls the width of the
arc cone.Increasing the AC Frequency
provides a more focused arc with
increased directional control.Note: Decreasing the AC Frequency
softens the arc and broadens the
weld puddle for a wider weld bead.AC Balance Control
Controls arc cleaning action.
Adjusting the % EN of the AC wave
controls the width of the etching
zone surrounding the weld.Note: Set the AC Balance control
for adequate arc cleaning action
at the sides and in front of the weld
puddle. AC Balance should be fine
tuned according to how heavy or
thick th eoxides are.
Independent AC Amperage Control
Allows the EN and EP amperage
values to beset independently.
Adjusts the ratio of EN to EP
amperage to precisely control heat
EN amperage controls the level of
penetration, while EP amperage
dramatically effects the arc cleaning
action along with the AC Balance
control.
/SPECIFICATIONS
Technical specifications
Item No ALUTIG-200P ALUTIG-200MV Rated Input Voltage 1PH ~ 230V ±15% 1PH ~ 115V/230V ±15% Max. Load Power Capacity TIG: 5.62KVA TIG: 4.55KVA MMA: 6.60KVA MMA: 5.33KVA Rated Duty Cycle(40oC) 60% TIG: 200A/18V TIG: 200A/18V MMA: 160A/26.4V MMA: 160A/26.4V 100% TIG: 160A/26.4V TIG: 160A/26.4V MMA: 130A/25.2V MMA: 130A/25.2V Welding Current/Voltage Range TIG: 5A/10.2V~200A/18V TIG: 5A/10.2V~200A/18V MMA:20A/20.8V~160A/26.4V MMA:20A/20.8V~160A/26.4V Open Circuit Voltage 70V~80V 70V~80V Power Factor 0.8 0.8 Efficiency 80% 80% TIG Pulse Peak Current 5A~200A 5A~200A Base Current 5A~200A 5A~200A Pulse Frequency 0.2Hz~200Hz 0.2Hz~200Hz Pulse Width (Ratio) 1~100% 1~100% AC TIG AC Frequency Range 20Hz~250Hz 20Hz~250Hz AC Clean Width (AC Balance) +40~-40 +40~-40 AC Clean Ratio (AC Bias) % +30~-50 +30~-50 MIX TIG MIX Frequency: 1Hz~5Hz 1Hz~5Hz DC Balance: (%) 20-80 20-80 Arc-starting Current 10A~160A 10A~160A Crater-filling Current 5A~200A 5A~200A Current Up-slope Time 0.1S~15S 0.1S~15S Current Down-slop Time 0-15S 0-15S Pre-Gas Time 0-15S 0-15S Flow-Gas Time 0-15S 0-15S Spot Arc Time 0-10S 0-10S MMA Arc Force 10A~160A 10A~160A Hot Start Time 0.1~3S 0.1~3S Hot Start Current 10A-160A 10A-160A Dimension (LxWxH) 540X240X480mm 540X240X480mm Weight (KG) 23KG 23KG
/ACCESSORIES
For Standard accessoriesTIG torch: TIG-26Electrode holder with cable 2MFor Optional accessoriesArgon gas regularWater-cooling unit: WC-100Foot PedalTrolley:ST-7Hand-hold Remote TIG torchTIG torch: TIG-26/RESOURCES
/DOCUMENTS
- Tel
- *Title
- *Content
- Loading...