Advanced Features

· Multi-Process Capable - Multi-Process Capable - Welds flux-cored, stick, TIG, pulsed MIG, and advanced processes like Double Pulse MIG*.
· Pulse MIG Process - Welds Mild steel, 4XXX and 5XXX series aluminum for superior quality welding.
· Double Pulse MIG Process - Delivers a staked dime appearance when welding mild steel and aluminum.
· Synergic Control -Set weld procedures with one control.
· Professional 4-Rollers Drive System - Allows for constant wire feed speed and consistent welds.

Pulse MIG

· The Pulse MIG process works by forming one droplet of molten metal at the end of the electrode per pulse. Then, just the right amount of current is added to push that one droplet across the arc and into the puddle. The transfer of these droplets occurs through the arc, one droplet per pulse.

· It minimizes warping and burnthrough on thin materials, not only for Aluminum, but also for Mild Steel. Moreover, it delivers ultra low spatters which is outstanding for Mild Steel welding.

Compared with the traditional DoublePulse, High Speed Double Pulse process can increase the welding speed by about 25%. Welding quality is comparable to TIG process.

No need to swing, You can easily get a cosmetically pleasing weld seam, with significantly lower and more controller heat input into the workpiece. It results in much lower distortion and less rework, very suitable for welding the thin Aluminum or S.S sheets.
By High-Speed Double Pulse process, the heat input of arc is alternating, effectively reducing the heat input of base metal. It reduces the occurrence of welding defects such as crack.

3 Steps to achieve weld perfection

1. Select operation mode
2. Select Job-list No.
3. Adjust welding current
(always the perfect setting by the synergic function
using the material thickness)

Synergy control with job-list

The Job-lists display is easily and intuitively controlled through its graphical user interface.We assembled the perfect welding curve in every Job-No. for highly efficient multi-process welding of carbon steels and stainless steel and aluminum alloys. Operation is easier than ever before.

Initial Arc control

We control the arc energy by welding waveform, so the success rate of arc ignition can be improved and quickly establish a molten pool.

Burn Back control

Adjustable time delay between turning off the arc and the wire feed to prevent wire sticking to the puddle.

Burn Back control

Adjustable time delay between turning off the arc and the wire feed to prevent wire sticking to the puddle.

Initial Arc control

We control the arc energy by welding waveform, so the success rate of arc ignition can be improved and quickly establish a molten pool.