MIG-350HD/500HD synergic, Pulse MIG Welder
/FEATURES
Quick Specs
- Industrial Application:
- Metal fabrication workshops
- Chemical and process industry
- Shipyards and offshore industry
- Steel structure workshops
- Processes:
- MIG
- MIG (GMAW-P) Pulsed
- Stick (SMAW)
- Input Power: 350HD: 3PH ~ 400V ±15%
- 500HD: 3PH ~ 400V ±15%
- Amperage Range: 350HD: 10-350A/500HD: 10-500A
- Rated Output at 40℃ (104℉):
- 350HD: 350A at 31.5V @60% Duty Cycle
- 500HD: 500A at 39V @60% Duty Cycle
General View of Control Panel
1. SELECT the Memory channel
2. OPEN the parameter of selected memory channel
3. STORE the setting to Memory channel
4. Push to Check Gas
5. Welding Process
MMA,
MAG(CO2)for Carbon steels
MAG(CO2/Ar) for Carbon steels
MIG (Argon) for Stainless steels6.Pulse MIG:ON/OFF
7.Synergic function：ON/OFF
8.Synergic setting (select wire diameter)
9.Arc Crater: ON/OFF
10.Select to adjust the Arc Crater Current
11.Select to adjust the Arc Crater Voltage 12.Arc Dynamic controls
Synergic MIG
Synergic pulsed welding
mode offers the simplicity
of single-knob control.The
machine will select the
correct pulse power based
on the wire feed speed
(WFS) set by the operator.
Select the base materials
and shield gas
MAG(CO2)for Carbon steels
MAG(CO2/Ar) for Carbon steels
MIG (Argon) for Stainless steels
Classical MIG/MAG
In classic mode, MIG / MAG welding is carried out in inert gas with automatic wire feed.With this mode, a high welding speed and excellent quality are offered without any extra costs in the processing offerrous metals, as well as various steels.
Pulse MIG
PMIG enables getting high quality stainless steel products. In this mode, on the main current will be superimposed transient current pulses and providing a rapid melting of the wire. As a result, the metal has no nodules. The MIG pulse also carries out a crushing crystals melt zone and form a tight seam quality. In addition, all the impurities are blown out of the weld pool. Adjustable heat input improves the quality of welding thin-walled metals. This prevents overheating of the aluminum to ensure the metal does not warp. It also decreases spatters and improves geometry and appearance of the weld joint. PMIG is indispensable for welding stainless steel, aluminum and other nonferrous metals which are sensitive to heat input.
The advantage of Wave-form Control System
Fe,Pulsed
Fe,no Pulsed
The latest technology of Waveform Control System with pulsed MIG control mode, can perfectly control the output of
welding power and get the precision Arc performance. The wire melting droplet transfer cycle is very clear, the welding
beam is very clean and very few spatters during welding.
/SPECIFICATIONS
Technical specifications
Item No MIG-350HD MIG-500HD Rated Input Voltage 3PH ~ 400V ±15% 3PH ~ 400V ±15% Max. Load Power Capacity 15.26KVA 26.99KVA Rated Duty Cycle(40oC) 60% MIG: 350A/31.5V MIG: 500A/39V MMA: 350A/34V MMA: 500A/40V 100% MIG: 300A/29V MIG: 350A/31.5V MMA:300A/32V MMA:350A/34V Welding Current/Voltage Range MIG: 10A/14.5V~350A/31.5V MIG: 10A/14.5V~500A/39V MMA:10A/20.4V~350A/34V MMA:10A/20.4V~500A/40V Open Circuit Voltage 70V~80V 70V~80V Power Factor 0.85 0.85 Efficiency 85% 85% Pre-Gas Time Preset Preset Flow-Gas Time Preset Preset Wire-feed Mechanism 4 Rollers 4 Rollers Wire-feed Speed Range 0~25m/ min 0~25m/ min Wire Spool Capacity 300mm (15kg) 300mm (15kg) Filler Wires Ø (mm) Fe, Ss: 0.6~1.6 mm 0.6~1.6 mm FLUX CORED: 0.8~2.0 mm 0.8~1.6 mm Al: 1.0~2.4 mm 1.0~1.6 mm Dimension 960x420x1400mm 960x420x1400mm Weight 85KG 85KG
/ACCESSORIES
For Standard accessories
MIG torch: MIG-501D
Earth clampFor Optional accessories
Argon gas regular
CO2 gas regular with heater
Trolley:WT-150/RESOURCES
/DOCUMENTS
- Tel
- *Title
- *Content
- Loading...