Plasma cutter for steel cutting CUT-70H Non HF
/FEATURES
Quick Specs
- Application:
- Home workshop
- Metal workshops
- Light fabrication
- Repair and maintenance
- For These Materials:
- Mild Steel
- Brass
- Copper
- Aluminum
- processes:Plasma cutting
- Input Power: 400V, 3-Phase
- Amperage Range:
- Rated Output at 40℃ (104℉):
- 70A at 115V @60% Duty Cycle
- Weight: 19 KG
General View of Control Panel
Control Panel Parameter Values
1.Ammeter/Voltmeter Display
2.Encoder Control
3.Gas supply problem
4.Over heat/Over loading
5.Power LED
Steel Cutting Capability (Thickness to scale.)
Rated cut capacity is based on traveling approximately 125mm/min to achieve a steady, precise cut.
This is the key rating that should meet or exceed your typical cutting thickness requirements..
Non-HF Arc Ignition system
Torches with pilot arc cut in without high frequency.
Torch off.
By pressing the trigger the
torch will be fed by the
current thus causing a
temporary short circuit
betweenelectrode and tip.The air then pushes up the
small piston, thuscreating,
between the electrode and
the tip, the distance need
-ed to strike the pilot arc.By positioning the torch on
the part to be cut,
theplasma arc will strike.
Less electromagnetic disturbance, with consequent absence of problems for any electronic, radio, television, telephone
and computer systems in the vicinity of the cutting positions.
Less electric stress on the torch - and on the respective connecting cables - due to the absence of the high voltage
necessary for striking the arc Greater simplicity in comparison with other torches(without high frequency) on the market,
with a consequent decrease of the risks of jamming in the mechanical pneumatic movement for striking the arc.
Subject to wear (electrode, tips, nozzles, diffusers etc.), thanks to the better cooling of the torch obtained by reducing
the insulating thicknesses (without endangering the safety parameters)./SPECIFICATIONS
Technical specifications
Item No CUT-70H Rated Input Voltage 3PH ~ 400V ±15% Max. Load Power Capacity 11.14KVA Rated Duty Cycle(40oC) 60% 70A/115V 100% 50A/105V Welding Current/Voltage Range 20A/90V~70A/115V Open Circuit Voltage 260V~290V Power Factor 0.85 Efficiency 85% Required Air Pressure 0.3~0.5MPa Gas Pro-flow/Retard Time 1S~10S Max.Cutting Thickness 22 Dimension (LxWxH) 540X240X480mm Weight (KG) 19 KG
/ACCESSORIES
For Standard accessoriesFor Optional accessories/VIDEO
3 phase 380V Professional-grade plasma metal cutting machine(3 phase 400V±15%).
/DOCUMENTS
- Tel
- *Title
- *Content
- Loading...