Home / All / Welding Equipment / All products /

70 AMP 3PH HEAVY DUTY PLASMA CUTTER THICKNESS CUT-70H

70 AMP 3PH HEAVY DUTY PLASMA CUTTER THICKNESS CUT-70H
70 AMP 3PH HEAVY DUTY PLASMA CUTTER THICKNESS CUT-70H70 AMP 3PH HEAVY DUTY PLASMA CUTTER THICKNESS CUT-70H70 AMP 3PH HEAVY DUTY PLASMA CUTTER THICKNESS CUT-70H70 AMP 3PH HEAVY DUTY PLASMA CUTTER THICKNESS CUT-70H

70 AMP 3PH HEAVY DUTY PLASMA CUTTER THICKNESS CUT-70H

igbt plasma cutting machine CUT-60HF plasma cutter machinery
Detail Information
  • /FEATURES

    Quick Specs
    Application:
    Home workshop
    Metal workshops
    Light fabrication
    Repair and maintenance
    For These Materials:
    Mild Steel
    Brass
    Copper
    Aluminum
    processes:Plasma cutting
    Input Power: 400V, 3-Phase
    Amperage Range:
    Rated Output at 40℃ (104℉):
    70A at 115V @60% Duty Cycle
    Weight: 19 KG

    General View of Control Panel

    CUT-60H-▏Plasma-Cutters_03Control Panel Parameter Values

    1.Ammeter/Voltmeter Display
    2.Encoder Control
    3.Gas supply problem
    4.Over heat/Over loading
    5.Power LED

    Steel Cutting Capability (Thickness to scale.)

    Rated cut capacity is based on traveling approximately 125mm/min to achieve a steady, precise cut.
    This is the key rating that should meet or exceed your typical cutting thickness requirements..




    CUT-60H-▏Plasma-Cutters_07








    Non-HF Arc Ignition system

    Torches with pilot arc cut in without high frequency.

    CUT-60H-▏Plasma-Cutters_11CUT-60H-▏Plasma-Cutters_13CUT-60H-▏Plasma-Cutters_15CUT-60H-▏Plasma-Cutters_17

    Torch off.

    By pressing the trigger the
    torch will be fed by the
    current thus causing a
    temporary short circuit
    betweenelectrode and tip.

    The air then pushes up the
    small piston, thuscreating,
    between the electrode and
    the tip, the distance need
    -ed to strike the pilot arc.

    By positioning the torch on
    the part to be cut,
    theplasma arc will strike.


    Less electromagnetic disturbance, with consequent absence of problems for any electronic, radio, television, telephone
    and computer systems in the vicinity of the cutting positions.
    Less electric stress on the torch - and on the respective connecting cables - due to the absence of the high voltage
    necessary for striking the arc Greater simplicity in comparison with other torches(without high frequency) on the market,
    with a consequent decrease of the risks of jamming in the mechanical pneumatic movement for striking the arc.
    Subject to wear (electrode, tips, nozzles, diffusers etc.), thanks to the better cooling of the torch obtained by reducing
    the insulating thicknesses (without endangering the safety parameters).




  • /SPECIFICATIONS

     

    Technical specifications

     

    Item NoCUT-70H
    Rated Input Voltage3PH ~ 400V ±15%
    Max. Load Power Capacity11.14KVA
    Rated Duty Cycle(40oC) 60%70A/115V
                                              100%50A/105V
    Welding Current/Voltage Range20A/90V~70A/115V
    Open Circuit Voltage260V~290V
    Power Factor0.85
    Efficiency85%
    Required Air Pressure0.3~0.5MPa
    Gas Pro-flow/Retard Time1S~10S
    Max.Cutting Thickness22
    Dimension (LxWxH)540X240X480mm
    Weight (KG)19 KG

  • /ACCESSORIES

    For Standard accessories
    For Optional accessories
  • /RESOURCES

  • /DOCUMENTS

ANY COMMENTS? YOU ARE WELCOME TO LEAVE MESSAGE TO US!
*Email
Tel
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
Review
  • Loading...